|
Sizing Tips
These instructions are ONLY for GripMaster golf grips - other manufacturer's grips will be sized differently.
THE GRIP MASTER ON SHAFT SIZE CHART
You Can Fine-Tune Your Sizing Using Double-sided Grip Tape
| |
|
|
Club Shaft Size |
|
Grip Size
|
|
Tape Wraps |
0.58 |
0.60 |
0.61 |
|
58 |
1 |
n/a |
STD |
+1/64th |
| |
2 |
STD |
+1/64th |
+1/32nd |
| |
|
|
|
|
| 60 |
1 |
n/a |
-1/64th |
STD |
| |
2 |
-1/64th |
STD |
+1/64th |
| |
|
|
|
|
| OS |
1 |
+1/64th |
+1/32nd |
+3/64th |
| |
2 |
+1/32nd |
+3/64th |
+1/16th |
PDF Version of Grip Sizing DirectionsYou will need Adobe Acrobat Reader to view the above link. If you do not see the file you probably do not have have the Adobe Acrobat Reader, click here to download the free reader.
|
Please Also Note:
- All sizes of the Grip Master one piece pre-wrapped grips have the same core diameter (0.55"). The size difference is achieved by varying the leather thickness by 0.2mm (0.008"). Where the shaft tapers to less than 14mm (0.55) extra tape will be required for a correct fit.
- In the USA men's standard club shaft size is 0.60.
- Two wraps of tape can typically be used without any installation problems. We recommend no more than three wraps of tape under the Pro-Standard grips and no more than 2 for the Shock Resistant grips. Depending on the number of wraps of tape, you may want to re-tension the grips.
- The non-perforated, Pro-Standard grips feel slightly smaller than the perforated or the shock resistant grips. Because of this many installers use 2 wraps of tape under the non-perforated, Pro-Standard grips. This may or may not work for you!
- All Grip Master grips are pre-tensioned - the tension is adjustable. Both size and firmness are affected by the tension. The tension affects the firmness of the Shock Resistant grips more.
- If you need professional fitting, find a local PCS fitter click HERE.
 |
|
